Suggestions On Sewing Machine Maintenance, sewing machines

There is a large list of things you must do to make the sewing machine work in operational conditions, but these are the basic elements you need every day. This list will not only keep your machine, it is also important for your safety. Sewing machines are not toys. They can maim and even kill if they are not managed properly. janome 2212


Removing Lint


Creates lint from the use of threads.  Although it seems quite harmless, it accumulates in hard-to-reach places and blocks the mechanism of your sewing machine. Open all crusts on the machine and clean the threads with a small brush. Usually, there is a group near the coil. Do not use a vacuum cleaner. It is too raw to suck and can eliminate small parts and oil. Try cleaning the sewing machine alarm every time the project is finished. Thanks to this your machine will always be ready for use. Janome DC5100 


Oil for sewing machines


Use the right oil! Do not use material that you put in the car's engine, as it will not penetrate the moving parts properly. The correct oil for the sewing machines is clean and it is possible that some of them were included when you bought the machine. If not, you can buy it quite easily, as in most shops with sewing. Instructions on areas that require regular lubrication can be found in the operating instructions. On some machines, these areas are marked, but in any case, check their instructions. After lubrication, make some stitches on the damaged material The maintenance of the machine adequately stops the wear and guarantees a smooth operation. It also prevents the formation of rust on surfaces. Rust not only stains your fabric but also penetrates the mechanism of your sewing machine and is crushed into moving parts. juki f300


Loose screws


When lubricating the machine, check the bolts for looseness and, if necessary, tighten them. Some of them may require the Allen key to be fixed, so it's worth taking care of the game.If you find the missing screw, do not use the device until it is replaced. A missing screw can cause serious damage to the device, especially if it is part of the synchronization mechanism. janome 660

Why Should You Learn Sewing Machine Repair?, sewing machines

A domestic sewing machine gives you the freedom to fix, change the style or change your clothes easily. However, if you work as a seamstress, you must be prepared to handle all types of sewing machine repairs, as you can easily return to work in a short period of time. janome 2206


Although your machine has been sold with a warranty, repairing it practically eliminates your machine to send or find your next service point for your individual model is not always possible. It is also true that many sewing machine repairs are low and can be done at home with a little knowledge.


The basic maintenance is enough to solve most of the problems you may have with your machine and even arrangements and loud noises can be solved with simple repairs of the machine. In some cases, if your machine is a high-quality model, it will probably be too heavy to be shipped immediately for repairs. Before sending your machine to repair it, you can do some things in your house to see if they work and solve the problem of your sewing machine. janome 7318


Locking the machine


In some cases, your machine may become clogged with fibres. This happens when you use the machine continuously for a long time when a lot of fluff accumulates in the machine. This depends mainly on the type and quality of the yarn used. In some cases, your device may even be clogged within a few hours of use.


In some cases, the thread can be gathered around the camera and coil. This thread can be removed from the two areas with tweezers or held in the hand with a special brush to prevent splashing.


It is necessary to remove the dirt that may accumulate during a period of time before lubricating it properly. Lubrication is necessary for the proper functioning of your machine, but you must use small amounts of machine oil and you must first thoroughly clean your machine. Janome DC5100 


Tighten the screws


One of the easiest repairs to the sewing machine that you can do at home is to tighten the visible bolts and bolts. In the case of a moving machine, some of its screws are released for a period of time, and in many cases can cause unnecessary noise in the machine. However, you should avoid tightening the screws too much until you feel a grip with little resistance. juki f300